How to price roof rejuvenation: what to charge per square, and how to build the number yourself
November 2, 2026 · House Dressing

Price roof rejuvenation per measured square, built up from your own costs, then check the result against your local market. That's the method. There is no independent price guide for this work yet. A single per square figure from the internet is somebody else's roof, crew and overhead.
This is for the roofer who already knows what roof rejuvenation is and is about to put it on an estimate for the first time. The homeowner side of the same question is in our per square foot guide. Your customer may well have read it.
The two figures you'll hear, and why neither is your price
Here are two named figures you can check yourself. Both were live on November 2, 2026.
| Who | What they publish | Measured against | The catch |
|---|---|---|---|
| Roof Maxx | $3,000 to $6,000 | "an approximately 2,000-square-foot home" | A home, not a roof |
| Martinez Roofing, Northern Colorado | $0.75 to $1.50 per square foot, closer to $1.85 on steeper or more complex roofs | Square foot, "including labor and materials" | One dealer in one region |
Martinez Roofing describes itself as a certified Roof Maxx dealer, and it deserves credit for publishing a rate at all. By our division, that rate is $75 to $150 per square, and about $185 on the hard ones. It puts most 2,000 square foot jobs at $1,200 to $3,600. That overlaps Roof Maxx's range only from $3,000 to $3,600.
The gap doesn't make either one wrong. Roof Maxx's own FAQ says "Prices per square foot vary depending on local dealers," and says repairs and add-on services "can affect this cost range."
The more useful thing is the unit. Peak 301 Pros AZ, which works as a subcontractor for roofing and exterior contractors, says "Partner pricing is per roofing square, measured by EagleView." Its rate goes to approved partners, so you can't copy it. You can copy the method.
Start with the measured square, not the house
A square is 100 square feet of roof surface. House size doesn't tell you that number. Take two 2,000 square foot houses with a 6/12 pitch, where the surface runs about 1.118 times the plan area. A one-story has about 2,236 square feet of roof before overhangs. A two-story on a 1,000 square foot footprint has about 1,118. Same size on the listing, about twice the roof.
Three things to watch when you pull the area:
- Drop the waste factor. Reroof estimates often add waste and round up to ordering squares. A spray job doesn't cut shingles, so use the surface area.
- Count only what you'll treat. A metal porch roof or a low-slope section that isn't asphalt shingle isn't part of this job.
- Note the shape. JobNimbus's pricing guide says "A simple gable and a cut-up roof with several hips, valleys, and dormers can have similar square footage and require very different amounts of material and labor." It's writing about reroofs, but more planes mean more moves for a spray crew too.
An aerial report is a good way to get the area, and that's all it gets you. Our homeowner quote checklist says "A price worked out from a satellite photo can measure your roof. It cannot tell how brittle your shingles are." Our cost guide adds "Anyone who gives you a firm price from the driveway is guessing." So prepare from the report and give the firm number after you've been up there.
What has to be inside the number
No worked example with dollar figures here, on purpose. A number from us would be wrong for your shop, and you'd be tempted to use it anyway. These are the lines to fill in with your own.
- Product. Your invoice price, the coverage rate on the product's own data sheet and the measured area. Every brand has its own mix and rate, so don't borrow another brand's figure. Ours are on the science page. Then measure what actually went on over your first few roofs.
- Crew time. Your fully loaded hourly cost, times the crew, times the hours. Count setup, protecting plants and siding, cleanup and the drive. Our order page starts you at two people and about three hours on the roof for an average roof, then says "Roof size, pitch and condition change the product and the time." Swap in your own clock as soon as you have one.
- Steepness and height. OSHA's construction standard says "Steep roof means a roof having a slope greater than 4 in 12 (vertical to horizontal)." To most roofers, 5/12 is a Tuesday. But the rule behind it calls for guardrails, safety nets or personal fall arrest once the edge is 6 feet or more up. Anchors and harness moves are hours. Our cost guide says "Treated shingles are slippery," so nobody's sprinting either. Ask your safety adviser how the standard applies to your spray work, then price for it.
- Prep. You can bundle a tune-up or bill it on its own. Either way, the quote should show two jobs as two things. Cleaning works the same way.
- Overhead. "Overhead is the quiet killer," says JobNimbus. Roof Maxx's dealer FAQ lists "the monthly cost of general liability insurance and accounting software, plus technology or marketing support as needed." Add your own, including vehicles and measurement reports. Ask your agent whether your liability policy covers spraying before you price the job as if it does.
- Weather days. Our data sheet says "Surface must be fully dry at application" and "Do not apply if rain, strong wind or severe weather is expected during or after application." A crew you send home still cost you the morning. In a cold market, your slow season overhead has to come out of the months you can spray.
- The roofs you turn down. This one's specific to rejuvenation. You'll climb roofs that are too far gone. That visit costs the same whether you sell the job or not, so the jobs you do sell have to carry it. Leave this line out and you'll feel pressure to treat roofs you shouldn't. That's how this trade gets a bad name.
Add those up and you have your cost. "Markup goes on top of that number, not in place of it," as JobNimbus says. It also says "Markup and profit margin are not the same number," so know which one you mean before you type a percentage. On the same job, as an older JobNimbus piece puts it, "Your markup percentage should be higher than your profit margin percentage." What that percentage should be is your call. We're not publishing one.
Write down your adders and your minimum
A base rate alone won't get two estimators to the same price. Write the rules down. Roof Maxx's FAQ lists height, steepness, size and complexity as factors, and Martinez's steep rate shows one way to turn that into a number.
- Pitch. Pick the pitches where your rate steps up, and set them from your own clock.
- Height. One story, two stories, and anything where the ladder setup eats the morning.
- Cut-up roofs. Decide what counts, like dormers, valleys and the number of planes.
- Small roofs. The drive and the setup don't shrink with the roof, so a small roof costs you more per square. A minimum charge says that out loud.
Three checks before the number goes on the estimate
Your market. Not a web page. Use the quotes homeowners show you at the kitchen table and what local dealers publish. If you're far off, find out why before you change anything. They may include repairs you don't. They may be pricing the house and not the roof. Or they may be losing money.
Your own replacement price. You know what you'd charge to replace that same roof, and that's a better comparison than any national average. Put the two side by side and ask if the treatment still makes sense to the person paying. Skip the percent-of-replacement shortcut. It lets a replacement figure set the price of a very different job.
The line-by-line test. Our quote checklist tells homeowners to look for what the price includes, what sits on its own lines and what paperwork comes with it. Could you explain every line to someone holding that list? If one line makes you mumble, fix it before they ask.
Don't lean on years to justify the price. No field study has established how many years of service life the treatment adds to any individual roof, and no such claim is made here. So there's no cost-per-year pitch to put on a House Dressing estimate.
And if your honest number comes out above what your market will pay, believe it. Rejuvenation may not be a service line for your shop, and it's cheaper to learn that on paper than over a season.
One treatment or a plan
Our cost guide says "A single treatment is one price. A maintenance program with inspections and a later second application is a different product with its own price." Treat it that way. A plan means you're selling future visits at a price you set today, so work out what those visits will take before anyone signs.
Be just as careful with the warranty line. Our order page says "The treatment on its own comes without a warranty." The 10-Year Roof Care Program, for dealers who run it, carries a limited warranty, and it is never priced separately. Have the agreement reviewed for your state before you use it.
How this works with House Dressing
Our order page says "Your price is your call." Our dealer page says "No franchise fee. No royalty." and "You buy oil at dealer pricing. You charge what your local market will pay." That also means nobody here hands you a rate card. If you want one, we're the wrong supplier.
If you'd rather build your own number, our dealer program sends the pricing and the full pack by email.
Common questions
What should I charge per square for roof rejuvenation?
There is no independent price guide yet, so nobody can honestly give you one national rate. Martinez Roofing in Northern Colorado, which describes itself as a certified Roof Maxx dealer, publishes $0.75 to $1.50 per square foot including labor and materials. By our division that is $75 to $150 per square, and closer to $1.85 per square foot on steeper or more complex roofs. That is one dealer in one region, so build your own number from your costs and use figures like that as a check.
Should I quote per square or a flat job price?
Build it per square so two estimators get to the same answer. Then show the homeowner the total, the measured area and what is inside the price. Keep repairs and cleaning visible, in the price or on their own lines, so the quote can be compared with another one.
Can I price a job from an aerial report without going on the roof?
The report can give you the area. It can't tell you how brittle the shingles are or whether the roof is a candidate at all. Use it to prepare, and give the firm price after you've looked at the roof up close.
Want the numbers for your roof or your market?
Drop your email and we send pricing, the dealer model, and the test data.
Get the pack →